| | |

Mold Removal and its Impact of Molds on Human Health 2022

– Mold Removal –

We all want to feel safe in our homes, but the presence of toxic mold can jeopardize our health abruptly.  

This article gives a guide to mold removal for anyone looking to rid the infestation from their home or residence wherever it crops up.

Mold is the development of multicellular fungal filaments and can be found nearly everywhere. It grows naturally in a damp environment. Such molds can evolve indoors and outdoors at any spot.

And as such molds are responsible for numerous human health problems and need to be washed in order to provide a healthy climate.

There are various ways to get rid of the mold. These all depend upon the types of mold you are dealing with.

There are many Mold removers available on the market, and it can be hard for you to select the best Mold Remover for your place.

What is Mold?

Mold is a common fungus that grows best in warm, damp environments and multiplies as microscopic spores. It travels through the air, attaching to structures like drywall, flooring, and other materials in a home.

Once it takes hold, mold in a house can multiply quickly in high humidity surroundings like basements, bathrooms and crawlspaces.

According to the Center for Disease Control (CDC), if you see or smell mold, there is a potential health risk and you should hire a professional mold detection company, like AdvantaClean, for cleanup and removal.

When tiny mold spores travel through the air and settle, under the right conditions, mold or mildew can multiply quickly, often going undetected, and become a problem inside your home.

Mold can grow almost anywhere when moisture is present for an extended period of time.

Where does Mold Grow?

Mold can multiply on most porous surfaces where there is damp stagnant air. While it prefers temperatures above 60 degrees, it can also grow in cold temperatures, which is why it can be found in a refrigerator.

Most often, however, it is found in the following places:

  • Wallpaper and drywall
  • Ductwork and ceiling tiles
  • Carpet, drapes, and furniture
  • Attics, basements, and crawlspaces
  • Books and magazines (anything made of paper or organic material)

The effects of mold not only include the potential for structural damage to your home. If you are in the market to sell, undetected mold can dramatically lower the value of your home.

Some real estate agents believe the presence of mold can drop the value of a home up to 10 percent.

Mold Removal Process

The effects of mold not only include the potential for structural damage to your home. If you are in the market to sell, undetected mold can dramatically lower the value of your home.

Some real estate agents believe the presence of mold can drop the value of a home up to 10 percent.

Mold removal (also known as mold remediation), is the process of cleaning mold by removing mold and treating surfaces and materials that have been contaminated by mold or mildew.

The methods used for removing mold will vary, depending on the type of mold in the house and the effects of mold on the surface or material.

Cleaning and Disinfection

You can easily clean mold that appears in bathrooms and decks by scrubbing them away with the proper cleaning products–this usually takes just a few minutes.

Once the cleaning and disinfection are done, you’ll want to apply the biocide to kill the mold roots.

When mold grows in places that aren’t easily seen, such as drywall, it may be too late to clean before you begin to notice the signs of infection.

These signs include mushy drywall, surface staining, and the typical musty smell that comes with mold infection.

At this stage, if the infestation is large enough, it may be a better idea to simply throw away the infected materials. This is when the mold removal process can become particularly messy, as you can see from the picture below.

Containment and Ventilation

The most important part of the mold remediation process is the beginning: containment and ventilation.

The reason for this is because you want to ensure as much as possible that whatever mold is present in your home doesn’t spread, otherwise you’ll end up having to put out more fires than one.

For containment, cover each surface that could become contaminated within the area you’re working in with plastic sheets that are secured in place.

This also helps keep your furniture nice and clean while you’re working.

Remember to cover all air ducts in the room you’re cleaning with plastic tape.

To ensure ventilation, it’s best to have your windows open and use air filtration devices such as air scrubbers. This ensures that any airborne mold spores that are floating around don’t spread into uninfected areas of the house.

The last thing you want during this process is to create more airborne mold problems.

Attacking the Source

Question: do you want your mold troubles to go away for a while, or to be gone for good?

Gone for good, right? This is why this next step is so important. Once you clean and remove the mold from the infected area, you want to set measures in place to ensure that it doesn’t return.

Mold grows in damp or moist areas, so the solution is either to fix/increase ventilation or to install dehumidifiers in particularly wet areas of the house like the basement.

Replacement

At this final stage, you’ll want to be sure to replace or repair any damaged or removed areas of your home. After all, every mold remediation job should leave your home looking better than when the process began!

Best Mold Removers You Can Use

1. RMR Brands RMR-141 Disinfectant and Cleaner

It works on nearly any surface, including wood, fiberglass, concrete, and tile. It promises to remove unsightly stains in 15 seconds, without the need for any scrubbing except in the case of the toughest stains.

2. Kaboom Mold & Mildew Stain Remover with Bleach No Drip Foam

To remove (and prevent) the buildup of mold and mildew, the Kaboom Mold & Mildew Stain Remover will get deep into the cracks and crevices for a deep clean that will last.

It’s a foam, so it doesn’t run down the walls like some liquid versions, and the thick formula is easy to apply thanks to the precision applicator tip.

3. Concrobium Mold Control Household Cleaners

Not all mold removers are safe for wood, but this one from Concrobium is made for wood jobs inside and outside your home. Beyond the wood, it can be used on concrete, drywall, shingles, siding, and grout.

It doesn’t contain any bleach or other toxic chemicals but instead uses a different method. The bottle claims that it “crushes and suffocates mold as the product dries out.”

4. Micro Balance EC3 Laundry Additive

Mold on your clothes? Unfortunately, it can happen, and when it does this mold removed from Micro Balance Health Products can help make it right out.

The formula is all-natural, so it’s free of harmful chemicals that can irritate sensitive skin.

In place of chemicals, EC3 relies on tea tree oil, citrus seed oil, and tangerine oil, which all work to sanitize and clean. You can add it to every load of laundry and it’s safe for fabrics that can be washed with normal detergent.

Not only does it eliminate mold spores, musty odor, and bacteria from your garments, it can even keep your washing machine clean too!

4. Wet and Forget Moss, Mold, Mildew, And Algae Stain Remover

When you’ve got mold on your concrete and you need something tough to remove, try this cleaner from Wet & Forget. Just like the name says, use the formula to wet the affected area and then forget it—no need for pressure washing, scrubbing or even rinsing.

5. Clean Smart Daily Surface Cleaner for The Home

When you want something tough enough to kill mold, but still want something safe for your family, there’s this surface cleaner from CleanSmart.

While it kills 99.9 percent of germs, including mold, it doesn’t contain bleach or any other strong chemicals. The scent is mild, and the cleaner leaves no chemical residue.

Read Also:

Impact of Molds on Human Health

Molds are known to cause many health problems in humans. They produce more problems for those who are either allergic to them or are already suffering from a lower level of immunity.

Molds have also been seen to impact the health of toddlers.

Exposure to Molds can cause eye irritation, nasal infection, coughing or throat infection, or frequent headaches. There have been symptoms of skin irritation as well for some people.

A healthy infant, when exposed to mold, can also develop a respiratory illness.

The effect of molds can be associated with some severe problems as well. These include weakness, poor memory, developing sensitivity to light, shortness of breath, or chronic cough.

All of this may affect the quality of an individual’s life. That’s why it becomes imperative to get rid of mold to sustain a healthy and disease-free environment.

Molds are quite prevalent in humid places and are known to have specific health effects on humans. So, it becomes crucial to get rid of the mold.

We hope our article will help you with any questions. And that this helps you make the right decision about the mold cleaner you need.

Similar Posts

Leave a Reply

Your email address will not be published. Required fields are marked *