Inaccessible Boot Device Error Code and 10 Fixing Tips

Inaccessible Boot Device error code 0x0000007b is a typical blue screen of death hitch that frequently happens to Windows 10 computers and laptops. However, inaccessible boot device errors in Windows 10 aren’t hard to fix. 

Inaccessible Boot Device Error Code

What Is The Inaccessible Boot Device Error?

We all know Windows loves to update itself. Often, it’s exciting—especially when a major upgrade rolls around. But your excitement can quickly turn to despair.

Picture the scene. You eagerly wait for Windows to reboot after the upgrade, then BAM! You see a “blue screen of death” (BSOD) with the inaccessible boot drive error message and your computer restarts.

In simple terms, the message means Windows lost its access to the system partition during the startup process.

Although tens of thousands of users saw the code as a result of a 2017 update, the boot device error has a number of possible causes, including BIOS updates and overclocked CPUs. Some users suggest that the problem appears to be more prevalent in computers running an SSD.

Let’s take a look at how you can fix the inaccessible boot device error in Windows 10. Unfortunately, you might need to try several different solutions.

Causes of Inaccessible Boot Device Error In Windows 10

The first step of solving the Windows 10 stop code Inaccessible Boot Device error is to understand what caused it. We will try to analyze a situation to understand this Windows error.

So, one of the most occurrences of the Windows stop code – Inaccessible Boot Device error is observed during an official Windows upgrade. You are waiting for your Windows to reboot after the upgrade is finished but BAM! The BSOD error with stop code – Inaccessible Boot Device appears.

Here’s what this means. It simply means that Windows lost access to your system’s partition during the reboot process and hence the stop code – “inaccessible” boot device error.

Here are a few reasons that might have caused the Windows 10 stop code Inaccessible Boot Device error.

  • Missing, corrupted, or misbehaving filter drivers that are related to the storage stack.
  • File system corruption.
  • Changes to the storage controller mode or settings in the BIOS.
  • Using a different storage controller over the default driver from Windows.
  • Moving the hard disk to a different computer that has a separate controller.
  • A faulty motherboard or storage controller, or faulty hardware.
  • Failure of the TrustedInstaller service to commit newly installed updates because of Component-Based Store corruptions.
  • Corrupted files in the Boot partition.

How to Fix stop code inaccessible boot device

Solution 1: Uninstall the Recently Installed Packages

If the stop code – Inaccessible Boot Device has occurred after a Windows update, you must uninstall the recently installed packages to fix it.

Follow these simple steps to uninstall recently installed packages on your PC.

Step 1: Open “Settings”.

Step 2: Navigate to “Update & security” > “Recovery”.

Step 3: Find “Advanced Startup” and click on “Restart Now”.

Step 4: Once a blue screen appears, go to the command prompt using this path “Troubleshoot > Advanced Options > Command Prompt”.

Step 5: Once the command prompt application opens up, type “dir c:” and hit “Enter”, C being the drive your Windows is installed in.

Step 6: Type in the command “Dism /Image:c:\ /Get-Packages” and press “Enter”. You will get a list of all the packages along with the date & time of their installation.

Step 7: Note down the name of the recently installed package. Type in the command “dism.exe /image:c:\ /remove-package /[package name]”. Make sure to use the recently installed package name instead of “[package name]”.

Step 8: Reboot your PC now.

The recently installed package has now been uninstalled from your system. If it was causing the Windows 10 stop code Inaccessible Boot Device error, your system must be fixed now!

Solution 2: Update your drivers

The next step is to fix the Windows 10 stop code Inaccessible Boot Device error is to update your drivers. In most Windows stop code – Inaccessible Boot device errors, the driver “Standard SATA AHCI Controller” is the faulty one.

Follow the below step-by-step instructions below.

Step 1: Click “Windows” + “X” to open the Power User Menu.

Step 2: Choose “Device Manager”.

Step 3: Click to expand on the device that is causing the problem. As mentioned earlier, the most common driver that is at fault is “Standard SATA AHCI Controller” under “IDE ATA/SATA controllers”.

Step 4: Select “Update Driver Software”.

Step 5: Click “Search automatically for updated driver software”.

Step 6: Follow the instructions that follow on your screen to update the device driver.

Step 7: Reboot your system.

Solution 3: Run the BSOD Troubleshooter

Due to continuous cases of BSOD errors in Windows, Microsoft decided to include an easy “Blue Screen Troubleshooter” button in Windows 10.

Follow the next set of simple instructions to use this feature & fix the Windows 10 stop code – Inaccessible Boot Device error in your PC.

Step 1: Go to “Settings” and click on “Update & Security”.

Step 2: Click on “Troubleshoot” from the left-hand panel.

Step 3: Go to “Blue Screen” and click on “Run the troubleshooter”.

Step 4: “Restart” your PC, after the process is completed.

Solution 4: Enable AHCI Mode in BIOS

The stop error – Inaccessible Boot Device error is not a new BSOD error. It has been for long enough for Windows users to figure out that enabling AHCI mode in BIOS instantly fixes the Windows 10 stop code Inaccessible Boot Device error.

Follow the next few steps to enter into BIOS mode to fix the said BSOD error.

Step 1: Depending on your device, the combination of keys to press during a reboot to enter BIOS mode differs. Check on your system provider’s website. It usually is a combination of the “ESC” key and one of the “Function” keys.

Step 2: Once you have access to the BIOS, go to “Advanced Features”.

Step 3: Change the “Set AHCI Mode” to “Enabled”.

Step 4: Reboot your system.

Solution 5: Run the SFC scan

The SFC scan can help you solve many system issues, including the BSOD error we are talking about in this blog: stop code – Inaccessible Boot Device! It fixes the Windows stop code Unmountable Boot Volume error too!

Follow these simple set of instructions to run System File Checker (SFC) and fix the Windows stop code Inaccessible Boot Device error.

Step 1: Open “Command Prompt (Admin)” from the Power User Menu (“Windows” + “X”).

Step 2: Type the command “sfc /scannow” and reboot your system after the process is completed.

Running the SFC scan should fix the Windows 10 stop code Inaccessible Boot Device or Windows 10 stop code Unmountable Boot Volume error.

Solution 6: Run DISM

This troubleshooting tool we’re going to use to fix the Windows stop code – Inaccessible Boot Device is Deployment Image Servicing and Management (DISM). It re-deploys the system image from scratch and fixes any potential conflicts or issues, in this case – the BSOD error, upon completion.

Follow these simple steps to run DISM and fix stop code – Inaccessible Boot Device

Step 1: Open the Power User Menu (“Windows” + “X”). Click on the “Command Prompt (Admin)” option.

Step 2: Type in the “DISM /Online /Cleanup-Image /RestoreHealth” command and hit Enter.

Step 3: Reboot your system once the process is completed and you are good to go.

Solution 7: Remove “Update Pending” Packages

The Windows 10 operating system can sometimes show the BSOD stop code – Inaccessible Boot Device error due to pending updates of packages.

Follow the step-by-step instructions below to get rid of “Update Pending” packages in your system.

Step 1: Follow Steps 1-4 mentioned in Solution 1.

Step 2: Type in the “reg load HKLM\temp c:\windows\system32\config\software” command and hit “Enter”.

Step 3: Type in the command: “reg delete HKLM\temp\Microsoft\Current Version\Component Based Server” command and hit “Enter”.

Step 4: Type the “reg unload HKLM\temp” command and hit “Enter”.

Step 5: Type the “dism/image: \ /get-packages” command and note all the packages with the tag “Install Pending”.

Step 6: Copy & paste this command into your command prompt: “MKDIR C:\temp\packages”.

Step 7: Type the command: “dism / image : C: \ remove package / [Package Name]:/scratchdir:c:\temp|packages”. Replace [Package Name] with the package name you noted in Step 4 (with tag “Install Pending”).

We are identifying the “Update Pending” packages and moving them into a temporary file using the last command to get rid of them.

Once you have gotten rid of these packages, reboot your system. The stop code – Inaccessible Boot Device error should be fixed by now!

Solution 8: Disable or update any antivirus software

Disable or update any antivirus software

The antivirus software in your system could be the reason behind the stop code – Inaccessible Boot Device error. In a way, antivirus software can prevent your Windows from reading data in your system/PC. If you have any antivirus in your system, disable it/them temporarily.

If you are not sure about the above step, update your antivirus software. Check if the error has gone or not.

Solution 9: Check the hard drive

As mentioned in the introduction, stop code – Inaccessible Boot Device error or stop code – Unmountable Boot Volume error could also be caused by the hard drive of your PC.

In this solution, we will be fixing hard drive issues via command prompt. Before we get into that, make sure to remove any external hard disk attached to your system.

Follow these simple steps to check your hard drive for any potential issues.

Step 1: Follow Steps 1-4 mentioned in Solution 1: Uninstall the Recently Installed Packages to open Command Prompt through Advanced Recovery Options.

Step 2: Type: “bootrec.exe /rebuildbcd” and hit “Enter”

Step 3: Type – “bootrec.exe /fixmbr” and hit “Enter”

Step 4: Type command: “bootrec.exe /fixboot” and hit “Enter”.

Reboot your system after these steps are completed. Your stop code – Inaccessible Boot Device should be fixed now!

Bonus Step: You can also try writing the command “chkdsk C: /f /r” in the command prompt and hit “Enter”.

If the BSOD stop code – Inaccessible Boot Device error is not fixed yet, the next one may work for you! It’s time to Enter Safe Mode!

Solution 10: Enter Safe Mode

More than often, your system gets stuck in the process of rebooting after the stop code: Inaccessible Boot Device appears.

If this is happening, the best option you are left with is to enter a safe mode.

Step 1: Hold on the “Power” button to turn your system on and press it again to turn it off. Repeat this process twice or thrice to begin Automatic Repair.

Step 2: Once the Automatic Repair begins, follow this navigation path “Advanced Options”> “Troubleshoot” > “Advanced Options” > “Startup Settings”. Hit “Restart”.

Step 3: Press the number “4” key to enter Safe Mode in Windows 10

Solution 11: Perform Windows 10 reset

Create a backup of your important files before performing this step.

Follow these simple steps to perform Windows 10 reset and fix stop code – Inaccessible Boot Device error.

Step 1: Follow Step 1 mentioned in Solution 10 (above) to begin “Automatic Repair” in Windows 10.

Step 2: Follow this navigation: Troubleshoot > Reset this PC > Remove everything and follow the on-screen instructions to reset Windows 10.

Select the drive where your Windows is installed and reset it.

Keep in mind that your system will ask for a Windows Installation Device in the process.

This should fix the stop code – Inaccessible Boot Device on your PC.

Solution 12: Check for faulty hardware

When hardware like RAM is faulty, you are likely to get such an error. And therefore, if the above solutions didn’t help you, try to check for any faulty hardware. Check Ram and if it’s fine, you can try checking the hard drive or motherboard. See if it works for you.

Solution 13: Reflash BIOS

Unfortunately, if things are still the same, we would like to recommend you reflashing your BIOS. This is because corrupted BIOS can be a big culprit for the issue and might bother you. however, you need to be careful while doing this.

How to Recover Unsaved or Lost Data due to stop code inaccessible boot device?

Often, after you fix stop code – Inaccessible Boot Device or Windows stop code: Unmountable Boot Volume, you might lose critically important data.

In such cases, you can use the ultimate data recovery tool called Recoverit Data Recovery to recover lost data. You can use this tool to recover all types of lost files after stopping error – Inaccessible Boot Device or Windows Stop code: Unmountable Boot Volume.

Follow these simple steps to recover your data using the Recoverit Data Recovery tool.

Step 1: Select the Location

Open the Recoverit Data Recovery tool and select the location from where you lost your files. After you choose the location, hit on the “Start” button to begin scanning.

Step 2: Scan the Location

While scanning is on the run, if you see your lost files in the list of scanned files, you can stop the process.

Step 3: Recover

Click “Preview” to see the file details such as file name, size, type, etc. Once you find the file you lost due to the stop code – Inaccessible Boot Device error, hit on “Recover” and save the file to a location in your PC.

Complete data recovery in just 3 simple steps! Use this useful tool to recover your lost files immediately.

In this end-to-end guide, we have talked about 13 solutions to resolve the Windows stop code: Inaccessible Boot Device error. We hope we could help you solve the issue.

If you lose any files during the process, use the Recoverit Data Recovery tool to recover lost files without any hassle!

We sincerely hope that this article satisfies its purpose of resolving your search query and that it gives you all the information you seek. It would be best if you posted a comment if you have any further queries.

Similar Posts

Leave a Reply

Your email address will not be published. Required fields are marked *