How to Get Rid of Error 0xC0000225 in Windows 10?

Are you struggling with how you can get rid of an error code that keeps popping up on your screen?  Don’t panic! This is not at all a hard problem to fix. 

How to Get Rid of Error 0xC0000225 in Windows 10?

When the user attempts to boot their PC, this error code appears. Usually, it is followed by these messages:

  • An unexpected error has occurred.
  • A required device isn’t connected or can’t be accessed.
  • Your PC needs to be repaired.

Windows show this error code when it is unable to find the right system files to boot a PC. The Boot Configuration Data (BCD) that tells your system how to boot properly is included in these critical files.

It should be noted that disks that use the more recent UEFI specification with the GPT partition scheme generally affect the error code 0xc0000225. Some of your system files might have been corrupted when you were updating from an older version of the Windows OS.

On the other hand, when a computer suddenly shuts down in the middle of a critical update, the c0000225 error may also occur. This can occur when the system files are corrupted by malware or when the PC has faulty hardware.

How to Get Rid of Error 0xC0000225 in Windows 10?

Using Windows Automatic Repair

One of the easiest ways to fix the error code 0xc0000225 is to run the built-in troubleshooter in Windows 10. This tool will automatically scan your system for issues, resolving them accordingly.

So, it will possibly fix your corrupted BCD, enabling you to fully boot your system

Here are the steps:

  1. Once you boot your system from the Windows installation media, you will see the Windows Setup window.
  2. Choose your preferred language, then click Next.
  3. When you see the Install Now screen, go to the bottom-left corner and click the Repair your Computer link.
  4. Follow this path:

Troubleshoot ->Advanced Options ->Automatic Repair

  1. Let the tool scan your system and resolve the issues. Once the process is complete, try booting your system normally and check if the error code 0xc0000225 is gone.

Performing an SFC Scan

If using the troubleshooter did not fix the error, we recommend trying other methods for scanning your system. Follow these instructions:

  1. Use the Windows installation media to boot your system.
  2. On the Windows Setup window, select your language and click Next.
  3. On the Install Now screen, click the Repair your Computer link, which you can find at the bottom-left corner.
  4. Follow this path:

Troubleshoot ->Advanced Options->Command Prompt

  1. Run the following command:

sfc /scannow

  1. Wait for the System File Checker (SFC) to scan Windows and repair missing or corrupt files. Once the process is complete, run this command:

chkdsk c: /r

Note: Remember to replace ‘c’ with the letter of your main partition.

  1. After running these scans, try booting your computer normally. Check if the error code 0xc0000225 is gone.

Read: System Service Exception Error in Windows: What it is & How to Fix It

Rebuilding the BCD

One of the ways to fix the error code 0xc0000225 is by rebuilding the BCD. After all, it is likely that this file is causing the error.

So, try to rebuild it and check if you can finally boot your system normally. To do that, you need to follow these steps:

  1. Boot your system using the Windows installation media.
  2. Once again, you will see the Windows Setup screen. Choose your preferred language, then click Next to proceed.
  3. Go to the bottom-left corner of the Install Now screen, then click the Repair your Computer link.
  4. Now you need to open the Command Prompt via the Advanced Options menu. You can do that by following this path:

Troubleshoot ->Advanced Options->Command Prompt

  1. Once Command Prompt is up, run the commands below. Remember to press Enter after submitting each command.

bootrec /scanos

bootrec /fixmbr

bootrec /fixboot

bootrec /rebuildbcd

You will be able to identify the ‘missing’ system files through the first command. On the other hand, the second and third commands allow you to write a new boot sector and MBR to your disk.

The last command lets you scan your system after applying the fixes. Once the processes are complete, try booting your computer normally. If you can start your system without the error, then you’ve resolved the problem!

Using System Restore

If you’ve ever felt regret over something you’ve done in the past, you’ve probably wished that you could go back in time and do things differently.

You may not be able to do that in your life, but on Windows 10, you can undo actions you performed on the system.

You can use System Restore and bring your computer back to a state wherein the error code 0xc0000225 did not exist.

Here are the steps:

  1. Navigate to the Advanced Options menu just as you did in the previous solutions.
  2. Now, select System Restore from the options.
  3. Choose a recent restore point. Doing this allows you to return your computer to a previous state without affecting your personal files.
  4. Boot your system normally and check if the error 0xc0000225 is gone.

Add a Comment

Your email address will not be published. Required fields are marked *